The sealed flight package moves from isolated verification into Amber Wing’s partitioned engineering bay. Ranuko supervises every connection while Nahuli holds the approved work order; Kiryati remains with them, and the parts supplier stays outside the access partition.
Ranuko
First paired module only. No shared bus until the rollback points are visible and confirmed.
The distribution module clicks into its isolated cradle. A second unit wakes beside it, then Amber Wing’s engineering display flashes amber as heat rises through a nonessential support circuit.
Nahuli
Hold the work order. That circuit is outside the package, but the fault is propagating through its support feed.
A warning tone repeats without touching life support, navigation, or the protected flight modules. The manual isolation panel lies beyond the partitioned bay, past the access seal and the marked rollback stations.
Ranuko
We can isolate it, but someone must leave the protected bay to reach the panel. If the temperature crosses the rollback limit, we lose this test window.
Ranuko keeps one hand over the physical disconnect while the thermal trace climbs. Nahuli’s work order remains open, the paired modules stay powered, and the route to the isolation panel waits beyond the sealed threshold.
Kiryati's turn“Has the support-feed fault avoided the flight modules?”
YES, BUT (Likely, rolled 63)
Ranuko reaches through the access seal and snaps the manual disconnect. The support-feed fault drops away from the flight modules, but the circuit’s heat surge burns out one local temperature sensor.
Ranuko
Flight modules stayed clear. We lost the support-circuit sensor, and this test window is closed until we replace it.
The paired modules settle into a safe isolated state, their rollback points still visible. Amber Wing retains the flight package, but the bay’s thermal monitoring now has a blind channel.
Nahuli
Record the fault and stop here. We protect the modules, preserve the rollback, and do not continue with degraded monitoring.
Nahuli closes the work order without energizing the shared bus. Beyond the partition, the parts supplier’s sealed receipt case remains untouched while Ranuko tags the failed sensor for replacement.
The Parts Supplier
The package remains yours. I will add the failed sensor to the transaction record, but no further release depends on accepting my network’s authority.
The fault is contained: the flight modules are unharmed, the support feed is isolated, and one temperature sensor is lost. Amber Wing’s independence and the approved installation boundaries remain intact.
Ranuko's turn“I’ll tag the failed sensor and preserve its replacement requirements.”
SUCCESS (Great Engineering, rolled +0)
Ranuko secures the failed temperature sensor in the Repair Kit’s padded diagnostic tray. He uses the Toolbelt’s fine probe to lift its connector without disturbing the isolated support feed.
The kit’s inspection lamp reveals the burned sensing element and intact mounting tabs. Ranuko records the sensor position, connector type, heat rating, and the support circuit’s isolation requirement.
He fits a durable quarantine tag around the tray and copies the replacement requirements into Amber Wing’s maintenance record, preserving the failed part as evidence rather than discarding it.
Nahuli
Good. Mark the replacement as required before any shared-bus test resumes.
Ranuko adds that condition to the record, linking the sensor to the closed work order and the visible rollback points. The replacement specification is complete and retrievable.
The Parts Supplier
I’ll attach that specification to the transaction record. The package remains released, with no authority exchanged.
The tagged sensor rests in quarantine beside the sealed receipt case. The flight modules remain safe, the failed component is documented, and Amber Wing’s installation boundaries remain unchanged.
✓ Quest Accepted
Restore the failed thermal monitoring channel
Ranuko's turn“I ask Tavik whether his parts cage can supply the required sensor.”
SUCCESS (Great Reasoning, rolled -2)
Nahuli
Tavik, can your parts cage supply the required temperature sensor? We need one matching this connector, heat rating, and isolated support circuit.
Ranuko opens the Repair Kit and places its specification beside the quarantined sensor. The kit’s inspection tools compare the connector and heat rating without energizing the failed circuit.
The Parts Supplier
Yes. I have a sealed sensor with the matching connector and rating. It is a reclaimed part, so its prior heat history is incomplete.
Tavik opens the receipt case and retrieves a labeled component. Ranuko’s Repair Kit confirms the mounting tabs and electrical specification match the failed unit, while the unknown service history remains recorded.
The Parts Supplier
The sensor is yours under the existing transaction. I will add its incomplete heat history to the record, and you can verify it before any shared-bus test.
The replacement sensor joins Amber Wing’s quarantined parts, secured with its provenance note. The consultation takes additional time for the record entry, but the required component is now available without changing ship authority.
+ New Item Acquired
Replacement Temperature Sensor